Server

Server is one of the key Flopsar components, which is responsible for managing the entire Flopsar environment. It is a single, binary file flopsar-server.

CLI

The Flopsar server has a few command line options. All the available options of the server can be listed by executing the command:

$ flopsar-server --help

Configuration

All the server settings are configured in a file settings.yml. This file contains the following default settings:

settings.yml
eula: false
name: my environment
data: /change/me
max_ext_size: 1MiB
agent:
  server_ip: 0.0.0.0
  server_port: 9000
ui_srv:
  server_ip: 0.0.0.0
  server_port: 9443
  ssl: false
otlp:
  enable: true
  http:  
    server_ip: 0.0.0.0
    server_port: 4318
  grpc:
    server_ip: 0.0.0.0
    server_port: 4317
    ssl : false
ssl:
  cert: server.crt
  key: server.pem
logger:
  backend: Local
  max_size: 50MiB
  max_files: 5
archive:
  enable: false
  policy: purge
  start_at: 03:00:00.0
  retention: 3days
pass_policy:
  enable: false 
  min_len: 8
  digits: false 
  special_chars: false
  capital_letters: false
  forbidden_chars: ''

eula

This option must be set to true, otherwise the server will not run. This is the EULA accept flag.

name

Name of the environment.

data

This option sets a path to the Flopsar environment directory.

max_ext_size

This option sets a maximal size of an extension jar file.

agent

This option sets a server socket address, which is used by agents to connect to the server.

  • server_ip - specifies the IP address (CIDR format), on which the server is to listen for TCP/IP connections from agents. Only agents should connect to this address. If you want the server to listen on all interfaces, put 0.0.0.0 value.

  • server_port - specifies the IP port, on which the server is to listen for TCP/IP connections from agents.

ui_srv

This option sets a server socket address, which is used by workstation clients to connect to the server.

  • server_ip - specifies the IP address (CIDR format), on which the server is to listen for TCP/IP connections from workstation clients. Only workstation clients should connect to this address.

  • server_port - specifies the IP port, on which the server is to listen for TCP/IP connections from workstation clients.

  • ssl - switches on/off encryption on the workstation clients connections.

otlp

This option manages OpenTelemetry feature. Currently, Flopsar supports only traces. Flopsar acts as an OpenTelemetry backend. It supports OTLP protocol. Please, refer to OpenTelemetry documentation for more details.

  • enable - enables/disables the OpenTelemetry feature.

  • http - OTLP/HTTP support for binary-encoded Protobuf format.

    • server_ip - specifies the IP address (CIDR format), on which the server is to listen for OpenTelemetry data. If you want the server to listen on all interfaces, put 0.0.0.0 value.

    • server_port - specifies the IP port, on which the server is to listen for TCP/IP connections from agents.

  • grpc - OTLP/gRPC support or binary-encoded Protobuf format.

    • server_ip - specifies the IP address (CIDR format), on which the server is to listen for OpenTelemetry data. If you want the server to listen on all interfaces, put 0.0.0.0 value.

    • server_port - specifies the IP port, on which the server is to listen for TCP/IP connections from agents.

    • ssl - switches on/off encryption off the gRPC connections.

Please note, you need a license which enables the OpenTelemetry feature.

ssl

This option switches on/off encryption. Please note, agent-server connections are not encrypted.

  • cert - the server certificate file name.

  • key - the server private key file name.

The SSL files must be stored in the ssl directory.

logger

This option manages the server logger.

  • backend - one of the two backend for loggers: Local or Syslog.

    • When Local is specified, the server log files will be stored in the log directory.

    • When Syslog is specified, the logs will be managed by the syslog. In this case, both options max_size and max_files are ignored.

  • max_size - maximal size a logger file can reach. When the value is reached, the logger file is rolled.

  • max_files - maximal number of logger files. The oldest file is overwritten, so that the maximal number files is maintained according to this option value.

archive

This option manages data archiving.

  • enable - if set to true, enables the data archiving feature. If set to false, disables it.

  • policy - if set to purge, removes all the old data. If set to archive, backup the data.

  • start_at - sets a time of day the archive procedure should start. The time of day is specified in the format HH:MM:SS.m

  • retention - sets the data retention.

pass_policy

This option allows you to configure the password requirements for your system. It provides several parameters to define the desired policy.

  • enable - if set to true, enables the passwords policy feature. If set to false, disables it.

  • min_len - sets a requirement for the minimal password length.

  • digits - if set to true, passwords must have at least one digit.

  • special_chars - if set to true, passwords must have at least one special character.

  • capital_letters - If set to true, passwords must have at least one capital letter.

  • forbidden_chars - this parameter allows you to specify a list of characters that are not allowed in passwords. If any of the specified characters are found in a password, it will be considered invalid. If the parameter is empty, all characters are allowed in passwords.

OpenTelemetry

As of this version, Flopsar partially supports OpenTelemetry, specifically handling only traces. To store data in the Flopsar database, you need to configure your environment to send data to the Flopsar database. Both environments with and without an OpenTelemetry collector are supported.

Collecter

In environments that utilize an OpenTelemetry collector, you must define an additional OTLP (OpenTelemetry Protocol) exporter in the collector configuration. This exporter should be used in the service to send data to the Flopsar database.

Steps to Configure OpenTelemetry Collector

  1. Define the OTLP Exporter: Add an OTLP exporter configuration in your OpenTelemetry collector configuration file. The exporter should be set up to point to your Flopsar database endpoint.

  2. Use the OTLP Exporter in Service: Ensure that the service section of your OpenTelemetry collector configuration references the newly defined OTLP exporter. This will enable the collector to forward trace data to the Flopsar database.

Example Configuration

Here is an example configuration snippet for an OpenTelemetry collector to add an OTLP exporter for Flopsar:

exporters:
  otlp/flopsar:
    endpoint: "<FLOPSAR_DATABASE_ENDPOINT>"
    tls:
      insecure: true

service:
  pipelines:
    traces:
      exporters: [otlp/flopsar]

Replace <FLOPSAR_DATABASE_ENDPOINT> with the actual endpoint of your Flopsar database.

No Collector

If you prefer not to use the OpenTelemetry collector, you can send data directly from agents to the Flopsar server. This requires setting at least two environment variables, so that your application process can read them.

Additionally, you may set the following options, which prevent the agent from sending both metrics and logs:

  • OTEL_LOGS_EXPORTER=none

  • OTEL_METRICS_EXPORTER=none

Storage

Flopsar makes use of a hybrid approach, which incorporates both SQL database and a custom engine storage. The engine storage is used to store the data while the SQL datatabse to store configuration data.

Data Archiving

The Data Archiving feature serves as a valuable tool to effectively manage the volume of your database. By enabling this feature, a daily execution is scheduled at the specified time. This process, governed by the chosen policy, facilitates either data purging or data archiving.

To exclusively retain recent data while disregarding older records, simply configure the system to adopt the purge policy as specified in the configuration file. Alternatively, opt for the archive policy, which entails compressing the data and relocating it to the designated <server_home>/arch directory. The archived data is stored within a zip file, encompassing invocations, key-value data, and their corresponding symbols.

Data Restoring

All the archive files can be used to restore the Flopsar environment. Suppose you have the ARCHIVE.zip file created during the archive procedure. You will need the workstation application also. In order to create a new local environment, just to explore the archive data, you must execute the following command:

$ flopsar-server create --archive ARCHIVE.zip --app flopsar-workstation.zip <TARGET_DIR>

This operation will create a new environment in the <TARGET_DIR> directory. To access this environment, you must execute the following command:

$ flopsar-server local <TARGET_DIR> 

This command will start the Flopsar server in a local mode, which is used only for data access purposes. Then you should be able to access the environment at the address https://localhost:9443

Last updated